Can A Nail Gun Use Staples? Find Out!

Can a nail gun use staples?

No, you can not. A nail gun is used only to fasten thin material. Staples are too thick to be fastened with a nail gun. You need to use a staple gun to fasten staples.

A staple gun is similar to a nail gun, but instead of using nails, it uses staples. A staple gun is a tool that is used to attach materials, such as paper, fabric or vinyl, to a surface. It is usually used to attach insulation to a wall, floor or ceiling. 

Staples are narrow pieces of metal that are bent into U-shaped loops. They are specially designed for use in a staple gun. Most staple guns use a spring to propel the metal staples through the material.

In this blog, we will take a look at the strength of staples compared to nails, how staple guns work, and how to identify the gauge of your staples.

Are Nail Guns And Staple Guns The Same?

You can’t tell the difference between a staple gun and a nail gun just by looking at them. At first glance, both tools look similar.

However, if you take a closer look, the two are different.

Staple guns are hand tools used to drive staples into wood, plastic, and even thin pieces of paper. Staples come in one of two types: the T-50 or the T-55. They are used to putting together some things.

Staple guns have fasteners and are usually fitted with metal wires. The wire is made of steel and has curved ends for easy entry into thin materials. This type of tool is used to attach pieces of wood or to join sheets of plastic or paper.

Are Staples Stronger Than Nails?

Staple guns are one of the most used tools in the world. Staple guns are tools used to drive thin wires or metal staples at the ends of metal strips to bond thin and light materials.

Staples are stronger than nails. They have metal wires and metal strips that hold them together. A nail is just a metal pin that holds a thin piece of wood with the help of a wedge.

Staples are more durable and can hold more than nails before bending or breaking. It can also be used on thinner surfaces to hold thinner pieces of material. Staples can be easily removed and replaced with new materials.

Staples are cheaper than nails and are commonly used by carpenters and other types of workers at construction sites. Nail is commonly used by people in homes and gardens.

Staples are one of the following types:

1. Ordinary staples:

Ordinary staples are typically used in home, school and office environments. Ordinary staples can be used to bind many types of paper.

2. Heavy-duty staples:

Heavy-duty staples are used for high-traffic areas in offices and other public places. They are designed to withstand heavy usage and resist tearing.

3. Upholstery staples:

Upholstery staples are used for heavy-duty fastening applications in furniture. Staples are typically made up of steel, though there are also plastic staples available.

How Do Staple Guns Work?

Staple guns are tools used to drive metal staples into materials such as wood and other types of wallboard. A stapler works using the same concept as a hammer or nail.

When you press the trigger, the mechanism inside the stapler pulls the stapler to the bottom of the gun, releasing it and firing it from the front of the gun.

Staples are designed to have an open end with a sharp tip to allow penetration of hard materials. As the staple passes through the material, the staple closes around the material through which it passes.

There are various options for getting a staple gun, such as size, power, purpose, and overall ease of use. If you want to be smart about DIY projects, home remodelling, or smart things, you can seriously profit from buying at a high price. -High-quality staple gun.

The high-quality staple guns in demand are:

Best Staple Guns

  1. Freeman PFS105 Pneumatic 10.5-Gauge Fencing Stapler
  2. WEN 61705 pneumatic staple gun
  3. Stanley TR150HL Heavy Duty Stapler

1. Freeman PFS105 Pneumatic 10.5-Gauge Fencing Stapler

The Freeman PFS105 pneumatic fence stapler is capable of driving 10.5 gauge wire staples. It may be used for a variety of applications.

The PFS105 has belt hooks and a non-slip comfort grip, as well as an optional T-handle for added control and a fast release nose for easy paper jam clearance. Wire alignment notches and depth adjustments enable precise and consistent staple placement.

This staple gun is essential for serious farmers and ranchers who wish to put in livestock and crops while also removing thorns. It is a sturdy, dependable, high-quality, and long-lasting option.

The Pros:

  • Usage is simple.
  • The stapler is designed to drive 10.5 gauge wire staples.
  • Can be used for many purposes [especially wood]
  • This staple gun has a non-slip grip, a T-handle, and a belt hook for full control of the tool.
  • The tool is made of a sturdy steel casing and can withstand a lot of wear. In addition, because it uses high-quality materials, it can be used for a long time without any problems.

The Cons:

  • It costs a little for some people. But it’s worth it!

2. WEN 61705 pneumatic staple gun

The WEN 61705 is a high-powered staple gun that is perfect for tensioning, carpentry, cutting, vinyl mounting, and other tasks. The staples are driven to wood, plastic, and other materials by a strong high-speed motor.

This pneumatic stapler has a 1/4 inch NPT intake fitting and a 360-degree exhaust. The lightweight design weighs only 1.8 pounds. The nose is extended for use in tight spaces and corners. The large magazine may store up to 100 fasteners at once.

This staple gun, comes with a big, easy-to-load magazine for quick staples, making your job easier and faster. Staple guns are perfect for renovations, crafts, and furniture construction.

The Pros:

  • This staple gun is one of the best staplers for woodworking, upholstery, and other applications.
  • It is equipped with a strong motor for driving wood and other materials.
  • This stapler is small and lightweight, making it ideal for usage in small settings.
  • It features a huge stapler magazine with a capacity of 100 staplers.
  • The intake and exhaust vents on this stapler help to control and maintain its high performance.

The Con:

  • The staplers are bought separately.

3. Stanley TR150HL Heavy Duty Stapler

SharpShooter high-power 1/2 inch staples and blood nailers from Stanley deliver great power and deep penetration. It’s simple to slide the entire stick staple load. Its anti-jam system saves time during work.

The tough aviation aluminium housing offers the durability required for optimum production efficiency. 

Heavy strength staples should be used with the Stanley Sharpshooter TRA700 series or the Arrow T-50. The length should range from 1/4 to 1-1 / 2 inches depending on the application.

For non-wood applications, use 1/8 inch blood. This stapler has Hi/Lo power levers for hard and soft materials and is compatible with regular staplers and blood. This item is manufactured in Taiwan.

The Pros:

  • The stapler can deliver great power and deep penetration with precision and consistency.
  • It has a jam avoidance feature that is simple to reload and boosts efficiency.
  • Staple guns are composed of tough aviation aluminium, which is extremely durable and long-lasting.
  • Standard staples are used.

The Cons:

  • When not properly maintained the lever can get stuck.

What Are 18 Gauge Staples Used For?

18 gauge staples are used for heavier duty jobs. 

18 gauge staples are used for things like nailing down linoleum, carpet, and plywood flooring. Some other applications of 18 gauge staples include fishing, boat building, woodworking, and roofing. 

18 gauge staples are not meant for light-duty jobs like stapling a piece of paper together. Staples are designed to compress and staple papers, but they aren’t designed to stand the strain of heavy-duty jobs.

How Do You Know What Gauge Your Staples Are?

The easiest way to determine the size of your staples is to check the packaging. It takes just a few seconds to do this and will go a long way towards making sure you have the right size staples. 

But if you don’t have the packaging around or are unsure of how to read the package, you can determine the size of your staples by measuring the length of the prongs on the staple with a ruler. 

This is a helpful trick to know if you find yourself in a bind and need to find the right size fast.

Final Note On Can A Nail Gun Use Staples

By now, you have hopefully acquired a better understanding of the nail gun and its uses. A nail gun can’t use staples but a staple gun can. 

You will now be able to make the right decision when buying a power tool. So make sure that you do not hesitate to buy one. Always remember that the staple gun can be a tool that you will always need to use in different places. 

We hope you find the information useful for your next project.